![]() This is one of the parameters that most influences the price of your Katana, as the blade is the main element. So there were big differences in the ways of forging, but what they both have is that the blades are very beautiful and extremely suitable for a sharp and battle ready sword.There are several types of steel and forges for a Katana. The Japanese samurai swords were differentially hardened and forged from tamahagane. You can also find folded Japanese katanas, but this was a completely different technique than the damask steel. The swords of damask steel now mainly have appealing patterns in which the forging of these blades has been elevated to an art form.Īt Samurai Katana Shop you can buy various European Medieval swords with a damask steel blade. Today, the steel grades are of high quality and have better properties. The impurities in the steel were distributed and the steel was equally strong everywhere. This was then forged and folded so that this carbon was evenly distributed over the steel. Also pieces of steel with a lot of carbon were added to make the sword harder. This operation gives the steel homogeneous properties but gives it a visible pattern. At that time, the iron contained many impurities and the blacksmiths started folding the steel to forge it out. These steels are welded under high temperature and the steel will bond to each other. This is a technique in which steels with a difference in carbon content and thus color are produced, thus creating a pattern in the steel. The carbon and vanadium make the steel very suitable for making swords, sabers and knives. The rolls or billets that were created were sold or forged. The patterns are mainly due to d carbides and can be clearly seen in the steel as dark and light shades. Wootz is a type of cast steel in a crucible in which the carbon content was dosed in such a way that the steel did not become too hard (due to too much carbon) or too soft. It is suspected that ore for Wootz steel came from one particular mine, which mainly had to contain phosphorus and elements of vanadium and molybdenum. With the production, a precise ratio of temperature and length of heating was very important. The steel contained a lot of iron carbide (cementite) which crystallized out during start-up or cooling and cartridges. Wootz steel or Woets is a hard cast steel and it was produced in India. Both of these techniques produce patterns and colors. Damascene steel used to be traded and thus ended up in Europe where it became known for swords and knives.ĭamask is actually a collective name for two different techniques or types of steel, the wootz steel and pattern-welded steel. The damask steel has a well-known name and has even spawned legends such as the ability to cut gun barrels or cut hair that falls on it in half. These swords were known to be very tough and could be sharpened very sharply with a resilient cut. ![]() This was done several times so that you can also talk about folded steel with many layers. The chunks of steel were forged to the desired length and then folded and forged again. The goal then was of course to improve the properties of the steel so that the best weapons were available. ![]() The swords made of damask steel had beautiful patterns and stripes. In the past it mainly concerned swords that were made and bought there, but later it also referred to the way of forging and the typical surface patterns. Originally from India, this steel is named after Damascus, the capital of Syria. What exactly is Damask or Damascus steel?ĭamask steel or damacus is the result of a technique to produce steel that consists of a large number of layers of steel that are forged together. ![]()
0 Comments
Leave a Reply. |